MACHINIST X99 Motherboard B9 LGA2011-3 Set + Intel Xeon E5 2660 V3 CPU Processor + DDR4 16GB 2400mhz Memory NVME M.2 for Desktop

Por favor revise nuestros paquetes cuidadosamente antes de comprar. Cuando selecciona la placa base, solo se enviará X99-B9. Seleccione la placa base + CPU y se enviará la placa base X99-B9 + procesador E5 2660 V3. Seleccione la placa base + CPU + RAM y se enviará la placa base X99-B9 + procesador E5 2660 V3 + memoria negra DDR4 16GB ECC 2400MHz. Por favor revise cuidadosamente.

CPU:
Serie del procesador: Xeon E5 2660 V3 (10 núcleos/20 subprocesos)
Frecuencia principal: 2.6GHz
Tipo de zócalo: LGA 2011-3
Caché L3: 25MB
Proceso: 22nm

Para problemas arancelarios, asegúrese de poder resolver los problemas de despacho de aduanas usted mismo. Si no puede resolverlo, no le recomendamos que compre productos en nuestra tienda, no nos hacemos responsables de los aranceles, gracias por su comprensión.

Parámetros de interfaz:

X99 B9 motherboard specifications:
Brand: Mechanic
CPU socket type: LGA 2011-3
Chipset: Intel C612
Compatible CPU types: Support Intel LGA 2011-3 sockets, such as Intel Xeon, Intel Xeon 2, Intel Core 2, etc.
Memory type: DDR4 DIMM, support desktop DDR4, server DDR4 (ECC, RECC), four channels, single slot supports up to 32GB memory, maximum memory capacity can reach 128GB (32GB*4), maximum frequency can reach 2400MHz (this depends on the CPU processor)
Expansion slot: 1*PCI-E 3.0 x16, 1*PCI-E 2.0 x4, 1*PCI-E 2.0 x1
Storage: Support M.2 SSD, 2.5-inch/3.5-inch SATA SSD and mechanical hard disk.
Support SATA (NGFF)/PCI-e (NVMe) protocol switching, the default state is NVMe M.2 mode.
NVMe M.2 mode is PCIe 3.0x4 standard, with the fastest read and write speed up to 3600M/S.
Sound card: Realtek ALC897 high-fidelity sound card
Network card: Realtek 8111H Gigabit network card
Size: 245*190*35mm, MM,
Shortcut key: F11
Enter BIOS: Press the power button, press and hold the "DEL" key until the BIOS interface appears.

BIOS features:
Diskless boot: Supported
Sleep: Not supported
Decoding above 4G: Supported
Virtualization (): Supported
Adjust BAR decoding size: Supported
Recover AC power failure: Supported
RAID: Support RAID0, RAID1, RAID5
Boot without graphics card: Supported
Memory timing modification (XMP): Not supported
Fan speed adjustment: Only supports CPU_FAN1 interface
Power supply: 8-phase power supply (4 times phase), PWM controller is uP1649Q, each phase power supply MOS tube is one up and one down, a total of 16 MOS tubes!

CPU and System Fan:
CPU_FAN1: Support intelligent temperature control, high CPU temperature, fast fan speed, low CPU temperature, low fan speed.
SYS_FAN1: No temperature control, fan running at full speed;
SYS_FAN2: No temperature control, fan running at full speed;
J_AUTO_ON1 Jumper Cap:
Restore AC power-off jumper cap, default to off state.
If you move the jumper cap to the right two pins to "ON" state, the motherboard will automatically power on when the motherboard is powered on.
Method to clear CMOS:
Turn off and use tweezers or other metal conductive objects to short the 2-pin JCMOS1 jumper for 3-5 seconds.
Package Contents:
1 X99 B9 X99 LGA 2011-3 Motherboard
1 * CPU Cooling Bracket
1 I/O Shield
1 * SATA Cable
Important! - There is no user manual and controller in our box, but we have PDF version, if you need them, please let us know and we can send them to you by email. If you mind them, please don't buy it. Thank you for your understanding and time.

Note:

1. Todos los procesadores de memoria de la placa base se someten a rigurosas pruebas antes del envío.
2. La batería que aparece en la foto de la placa base se retirará antes del envío, ya que China Post y las aduanas prohíben su uso.
3. Para cuestiones fiscales, asegúrese de poder resolver los trámites aduaneros usted mismo. De lo contrario, no le recomendamos que compre productos en nuestra tienda. No nos hacemos responsables de los aranceles aduaneros. Gracias por su comprensión.
4. Se utiliza para instalar la memoria. La RAM debe instalarse primero en las ranuras n.° 1 y n.° 2 (ranuras verdes). Las ranuras de memoria negras de la placa base (n.° 3/n.° 4) no funcionan solas. La memoria debe insertarse primero en la ranura principal amarilla.